topic Re: ECHECK being declined for 103 response reason code in Integration and Testing

ECHECK being declined for 103 response reason code

Robert_Harper — Mon, 04 Mar 2013 18:33:57 GMT

I'm sending an ECHECK message with, what I can tell from the samples should be a fully filled out message. Looking up the response reason code, 103, it says something about not providing a password. The problem is, that I don't seen anywhere in the API or samples where a password is used.

Here's the raw response.

1.0|3|103|This transaction cannot be accepted.||P||0|B4EACCE9DC4FE33547830184B7DEF02E|||||||||||||

Any ideas or is this just an account configuration thing?

Re: ECHECK being declined for 103 response reason code

RaynorC1emen7 — Mon, 04 Mar 2013 19:53:46 GMT

103 is

A valid fingerprint, Transaction Key, or password is required for this transaction.

For Echeck is the transactionKey.

Re: ECHECK being declined for 103 response reason code

Robert_Harper — Mon, 04 Mar 2013 21:43:08 GMT

I'm now receiving this for a response:

1.0|3|33|(TESTMODE) Bank account number is required.|000000|P||0|E17D34D2A0202418F3EEFEACCA8CFAA7|||||||||||||Bank Account

I am settint the x_bank_acct_num= to a value so what could be the problem now?

Re: ECHECK being declined for 103 response reason code

RaynorC1emen7 — Mon, 04 Mar 2013 22:12:53 GMT

If it said it not there, did you check your request to see if it got pass?

Re: ECHECK being declined for 103 response reason code

Robert_Harper — Tue, 05 Mar 2013 13:52:04 GMT

Yes. I didn't show the information because I had tried with my real account information. I am sending the bank account number and a valid routing number. Still the error is "Bank account number is required.". I don't understand because the value is there.

I'd first tried with a ficticious number like: x_bank_acct_num=555666.

For the raw request string:

x_delim_data=TRUE&x_delim_char=%7c&x_type=AUTH_CAPTURE&x_bank_acct_num=555666&x_bank_aba_code=043000261&x_bank_acct_type=0&x_bank_check_number=1234&x_bank_acct_name=JOHN+DOE&x_first_name=JOHN&x_last_name=DOE&x_address=6671+SOUTH+REDWOOD+ROAD%2c+SUITE+201&x_city=WEST+JORDAN&x_state=&x_country=USA&x_zip=84084&x_phone=8012658800&x_amount=1.25&x_cust_id=94puaHTu9k8&x_version=1.0&x_market_type=2&x_device_type=1&x_response_format=1&x_method=ECHECK&x_login=94puaHTu9k8&x_tran_key=6R3K6w3HYh5v9JY9&x_description=CT+Center+Payment&x_relay_response=

The response is:

1.0|3|33|(TESTMODE) Bank account number is required.|000000|P||0|E17D34D2A0202418F3EEFEACCA8CFAA7|||||||||||||Bank Account

In the request, you can see that x_bank_acct_num=555666 is set. What am I missing?

Re: ECHECK being declined for 103 response reason code

RaynorC1emen7 — Tue, 05 Mar 2013 14:39:33 GMT

Took out all the none required fields as listed in

http://www.authorize.net/support/eCheck.pdf

x_echeck_type=ARC&x_delim_data=TRUE&x_delim_char=|&x_bank_acct_num=555666&x_bank_aba_code=043000261&x_bank_acct_type=SAVING&x_bank_acct_name=JOHN+DOE&x_amount=1.25&x_method=ECHECK&x_login=94puaHTu9k8&x_tran_key=6R3K6w3HYh5v9JY9&x_relay_response=&x_market_type=2&x_device_type=1

get the

<response><ResponseCode>3</ResponseCode><Errors><Error><ErrorCode>33</ErrorCode><ErrorText>Bank account number is required.</ErrorText></Error><Error><ErrorCode>33</ErrorCode><ErrorText>Bank ABA routing code is required.</ErrorText></Error><Error><ErrorCode>90</ErrorCode><ErrorText>ACH transactions cannot be accepted by this system.</ErrorText></Error></Errors><AuthCode>000000</AuthCode><AVSResultCode>P</AVSResultCode><CVVResultCode/><TransID>0</TransID><RefTransID/><TransHash>E17D34D2A0202418F3EEFEACCA8CFAA7</TransHash><TestMode>1</TestMode><UserRef/><AccountNumber/><AccountType>Bank Account</AccountType></response>

and http://developer.authorize.net/tools/responsereasoncode/

90 - ACH transactions cannot be processed using a card present account.

Re: ECHECK being declined for 103 response reason code

Robert_Harper — Tue, 05 Mar 2013 15:12:15 GMT

Do they really need the bank name? I don't get that data at all and since our UI is a plain old telephone, there isn't a good way to have the user give it to us.

Re: ECHECK being declined for 103 response reason code

RaynorC1emen7 — Tue, 05 Mar 2013 15:26:35 GMT

Do they really need the bank name?

Probably not, it probably for informational only.

Re: ECHECK being declined for 103 response reason code

Robert_Harper — Tue, 05 Mar 2013 15:46:05 GMT

Part of the reason I was asking is that the sample does not show setting the bank name but the PDF states that it is required.

The message I get in the delimited response, says that a field is blank but you have additional information that shows that my test account is not configured to accept checks. How would I change the account settings so that I can test a check payment?

Re: ECHECK being declined for 103 response reason code

RaynorC1emen7 — Tue, 05 Mar 2013 15:53:09 GMT

Is you test account Card present account? Then you will need to get a new Card NOT present test account.

Re: ECHECK being declined for 103 response reason code

Robert_Harper — Tue, 05 Mar 2013 15:59:46 GMT

Actually, I'm not sure. I don't recall a lot of options when I originally set up a test account.

Do I have to start all over or can I just add one?

Re: ECHECK being declined for 103 response reason code

RaynorC1emen7 — Tue, 05 Mar 2013 16:02:37 GMT

Need to start over. as it can be change once it is created.

Re: ECHECK being declined for 103 response reason code

Robert_Harper — Tue, 05 Mar 2013 16:50:54 GMT

I've created a new account, ensuring that I selected the CNP type. Now I get a different set of repsonses. Is there a separate account type for EChecks? Are the developer accounts only allowing CC transactions?

03/05 09:46:06.570 Successfully posted a payment
03/05 09:46:06.572 x_delim_data=TRUE&x_delim_char=%7c&x_type=AUTH_CAPTURE&x_bank_acct_num=555666&x_bank_aba_code=043000261&x_bank_name=Unknown&x_recurring_billing=FALSE&x_bank_acct_type=CHECKING&x_bank_check_number=1234&x_echeck_type=TEL&x_bank_acct_name=JOHN+DOE&x_first_name=JOHN&x_last_name=DOE&x_address=6671+SOUTH+REDWOOD+ROAD%2c+SUITE+201&x_city=WEST+JORDAN&x_state=&x_country=USA&x_zip=84084&x_phone=8012658800&x_amount=1.25&x_cust_id=64u8A4VsNC&x_version=1.0&x_response_format=1&x_method=ECHECK&x_login=64u8A4VsNC&x_tran_key=5YTRm84HtZyf6457&x_description=CT+Center+Payment&x_relay_response=FALSE
03/05 09:46:06.575 Raw response
03/05 09:46:06.576 3|1|246|This eCheck.Net type is not allowed.||P|2185444627||CT Center Payment|1.25|ECHECK|auth_capture|64u8A4VsNC|JOHN|DOE||6671 SOUTH REDWOOD ROAD, SUITE 201|WEST JORDAN||84084|USA|8012658800||||||||||||||||E25A3C70670AB889F49233F20ACDF422|||||||||||||XXXX5666|Bank Account||||||||||||||||

I've commented out setting the device type and markte type in the message. I can't find a list of valid types, but when I set the market type to 2, as shown in all examples, the service complains that the market type is invalid for an ECheck.

When I search the E-Check PDF for market type, the search comes up empty.

Re: ECHECK being declined for 103 response reason code

RaynorC1emen7 — Tue, 05 Mar 2013 16:58:26 GMT

I think for test account, not all x_echeck_type is enabled by default

read this.

http://community.developer.authorize.net/t5/Integration-and-Testing/How-to-solve-This-eCheck-Net-type-is-not-allowed/m-p/21155/highlight/true#M11538

market type to 2

market type setting is for CP account only.

Re: ECHECK being declined for 103 response reason code

Robert_Harper — Tue, 05 Mar 2013 17:04:55 GMT

I've sent them a request for a change to allow the TEL check type.

So if I understand you correctly, I souldn't be setting the market type for the CC processing either since I am a CNP user, correct?

Re: ECHECK being declined for 103 response reason code

RaynorC1emen7 — Tue, 05 Mar 2013 17:44:42 GMT

So if I understand you correctly, I souldn't be setting the market type for the CC processing either since I am a CNP user, correct?

Yes.