topic Re: Credit Card reader delete leading characters? in Integration and Testing

Credit Card reader delete leading characters?

jkrizan — Fri, 08 Sep 2017 13:01:13 GMT

Hello,

We are using a Magtek credit card reader as input to the credit card field on WooCommerce POS. However, when we swipe the card two leading characters like B% are displayed. Where is the modification made to truncate those uneeded marks for processing?

Thanks,

Re: Credit Card reader delete leading characters?

RichardH — Mon, 11 Sep 2017 22:32:41 GMT

Hello @jkrizan

You may need to contact Magtek, the manufacturer of the device for information on how to solve your issue.

Richard

Re: Credit Card reader delete leading characters?

NexusSoftware — Tue, 12 Sep 2017 00:37:33 GMT

By default, sentinels are enabled and transmitted. To modify the default settings of a USB Magtek reader on a Windows machine, for example, see below.

First you would need to download and install the demo application from:
http://www.magtek.com/support/software/demo_programs/usb_swipe_insert.asp

Once installed run the application and attach the MSR device. Once the device is detected follow the directions below.

To disable sentinels:

1. In the orange highlighted area check “Auto Add Length” and then in the line below enter: 01 14 03 and select “Send Msg”.

To enable sentinels:

1. In the orange highlighted area check “Auto Add Length” and then in the line below enter: 01 14 63 and select “Send Msg”.

You will then get a response from the device informing you that the command was successful.

After the command has been sent you will need to power cycle the device.