cancel
Showing results forย 
Search instead forย 
Did you mean:ย 

accept.js - test mode works - production mode: Failed Error Code : E00001

Just when I though I was home free ...

Test mode is working fine. Switching to production mode, I:

1. generated all new keys for my client, and put those into the application
2. Switched to the production version of the js
4. Made sure "live" is checked in the client admin
4. Double checked all my keys ...

However, when submitting a payment in production, the nonce dataValue is being generated, the dataDescriptor is correct, but the transaction itself generates "Transaction Failed Error Code : E00001". Looking that up, not much help "... an unexpected system error".

Switching my keys back to the test ID, and switching the js version back to sandbox ... works again.

Just to make sure I've got the js correct:
Sandbox: https://js.authorize.net/v3/AcceptUI.js
Production: https://jstest.authorize.net/v3/AcceptUI.js

And I've double checked and triple checked all the key values ...

If I purposely put in something that I know will fail like a mangled zip code, my "Your Transaction Failed" script triggers, so THAT is making it through processing on the authorize.net side of things.

Entering in card information that I know to be good however, generates the E00001 error.


I'm not even sure where to start looking for this, as the error code isn't helping me much ...
Suggestions?

LGMizzell
Contributor
10 REPLIES 10

One more quick thing - if I purposely mangle the data-clientKey value, I'll get a "invalid authentication values" message in the console.

If I put in the correct data-clientKey value, nothing is returned in the console - I just get the "Transaction Failed Error Code : E00001" returned by the app itself.

Still searching for clues. No luck yet ...

LGMizzell
Contributor

One more note - in the OLD payment system that's still using the MD5 hash that I'm trying to replace, the new key numbers work.

 

Authorize.net disabled my old keys WAY before 24 hours were up, panic mode kicked in, I replaced the old keys with the new and poof ... transactions started working again.

Meanwhile, back in my new accept.js version app, sandbox still works great, production ... nope.
I'm stuck.

I've kinda run out of ideas. I've triple checked everything.
New keys for production version WORK in an older version of the payment system, so the keys I'm using are good. I'm referencing the correct accept.js versions for sandbox and production.
I've checked that I've got my response and receipt URLs defined in the client admin for the production version. Exact same addresses as the sandbox, so those should work as well.

Code below works fine when pointing to sandbox versions of everything.
Not so much production ...

The relevant parts of my payment page:

<form id="paymentForm"
    method="POST"
    action="https://mysite.com/account/order_receipt.php" >
    <input type="hidden" name="dataValue" id="dataValue" />
    <input type="hidden" name="dataDescriptor" id="dataDescriptor" />
    <input type="hidden" name="enrid" value="<?php echo $tE['id']; ?>">
    <button type="button"
        class="AcceptUI btn-success btn-lg"
        data-billingAddressOptions='{"show":true, "required":false}' 
        data-apiLoginID="****DQvr7k" 
        data-clientKey=" ** production key here ** "
        data-acceptUIFormBtnTxt="Submit" 
        data-acceptUIFormHeaderTxt="Card Information" 
        data-responseHandler="responseHandler">Pay
    </button>
</form>
    
<script type="text/javascript">

function responseHandler(response) {
    if (response.messages.resultCode === "Error") {
        var i = 0;
        while (i < response.messages.message.length) {
            console.log(
                response.messages.message[i].code + ": " +
                response.messages.message[i].text
            );
            i = i + 1;
        }
    } else {
        paymentFormUpdate(response.opaqueData);
    }
}

function paymentFormUpdate(opaqueData) {
    document.getElementById("dataDescriptor").value = opaqueData.dataDescriptor;
    document.getElementById("dataValue").value = opaqueData.dataValue;
    document.getElementById("paymentForm").submit();
}
</script>

Here's the relevant parts of my receipt page. Test display code included. Hopefully commented well enough so that you can tell what's going on:

 

<?php

echo '<p>Debug mode on. Errors listed below:<br> ';
error_reporting( E_ALL );
ini_set( 'display_errors', '1' );
echo '<hr></p>';

require 'anet_php_sdk/autoload.php';
require_once 'SampleCodeConstants.php'; // contains: const MERCHANT_LOGIN_ID = "****DQvr7k"; const MERCHANT_TRANSACTION_KEY = "****75EGraAR93x7";

use net\ authorize\ api\ contract\ v1 as AnetAPI;
use net\ authorize\ api\ controller as AnetController;

include( 'qry/config.php' );
// CODE HERE GETS A RECORD FROM THE DATABASE FOR SOME NEEDED VALUES AND POPULATES A VARIABLE FOR THE NONCE VALUE

$theNONCE = $dataValue;

// BLOCK BELOW PURELY FOR TESTING TO SEE IF VALUES ARE POPULATED<br>
// ALL VALUE ARE BEING CORRECTLY RETURNED FOR THE RECORD

echo 'handling fee '.$handlingFEE.'<br>';
echo 'pamount '.$pamount.'<br>';
echo 'pfirstName '.$pfirstName.'<br>';
echo 'plastName '.$plastName.'<br>';
echo 'theNONCE '.$theNONCE.'<br>';
echo 'addr '.$paddr.'<br>';
echo 'city '.$pcity.'<br>';
echo 'state '.$pstate.'<br>';
echo 'postal '.$ppostal.'<br>';
echo 'countrh '.$pcountry.'<br>';
echo 'email '.$pemail.'<br>';

  
// OK, EVERYTHING IS CORRECT TO CREATE THE TRANSACTION

function createAnAcceptPaymentTransaction( $amount )

{

  // VARIABLES WON'T WORK UNLESS DEFINED AS GLOBAL. THANKS Renaissance ...<br>

  global $pfirstName, $plastName, $enrID, $theNONCE, $pamount, $paddr, $pcity, $pstate, $ppostal, $pcountry, $pemail, $transCODE;

  /* Create a merchantAuthenticationType object with authentication details retrieved from the constants file */

  $merchantAuthentication = new AnetAPI\ MerchantAuthenticationType( $pamount );
  $merchantAuthentication->setName( \SampleCodeConstants::MERCHANT_LOGIN_ID );
  $merchantAuthentication->setTransactionKey( \SampleCodeConstants::MERCHANT_TRANSACTION_KEY );

  // Set the transaction's refId

  $refId = 'ref' . time();

  // Create the payment object for a payment nonce

  $opaqueData = new AnetAPI\ OpaqueDataType();
  $opaqueData->setDataDescriptor( "COMMON.ACCEPT.INAPP.PAYMENT" );
  $opaqueData->setDataValue( "$theNONCE" );

  // Add the payment data to a paymentType object
  $paymentOne = new AnetAPI\ PaymentType();
  $paymentOne->setOpaqueData( $opaqueData );

  // Create order information

  $order = new AnetAPI\ OrderType();
  $order->setInvoiceNumber( "$enrID" );
  $order->setDescription( "Enrollment Payment for HMT$enrID" );

  // Set the customer's Bill To address prim_email, prim_fname, prim_lname

  $customerAddress = new AnetAPI\ CustomerAddressType();
  $customerAddress->setFirstName( "$pfirstName" );
  $customerAddress->setLastName( "$plastName" );
  $customerAddress->setCompany( "" );
  $customerAddress->setAddress( "$paddr" );
  $customerAddress->setCity( "$pcity" );
  $customerAddress->setState( "$pstate" );
  $customerAddress->setZip( "$ppostal" );
  $customerAddress->setCountry( "$pcountry" );

  // Set the customer's identifying information
  $customerData = new AnetAPI\ CustomerDataType();
  $customerData->setType( "individual" );
  $customerData->setId( "" );
  $customerData->setEmail( "$pemail" );


  // Add values for transaction settings

  $duplicateWindowSetting = new AnetAPI\ SettingType();
  $duplicateWindowSetting->setSettingName( "duplicateWindow" );
  $duplicateWindowSetting->setSettingValue( "60" );

  // Create a TransactionRequestType object and add the previous objects to it

  $transactionRequestType = new AnetAPI\ TransactionRequestType();
  $transactionRequestType->setTransactionType( "authCaptureTransaction" );
  $transactionRequestType->setAmount( $amount );
  $transactionRequestType->setOrder( $order );
  $transactionRequestType->setPayment( $paymentOne );
  $transactionRequestType->setBillTo( $customerAddress );
  $transactionRequestType->setCustomer( $customerData );
  $transactionRequestType->addToTransactionSettings( $duplicateWindowSetting );

  // Assemble the complete transaction request

  $request = new AnetAPI\ CreateTransactionRequest();
  $request->setMerchantAuthentication( $merchantAuthentication );
  $request->setRefId( $refId );
  $request->setTransactionRequest( $transactionRequestType );

  // Create the controller and get the response

  $controller = new AnetController\ CreateTransactionController( $request );
  $response = $controller->executeWithApiResponse( \net\ authorize\ api\ constants\ ANetEnvironment::SANDBOX );

  if ( $response != null ) {

    // Check to see if the API request was successfully received and acted upon

    if ( $response->getMessages()->getResultCode() == "Ok" ) {

      // Since the API request was successful, look for a transaction response and parse it to display the results of authorizing the card

      $tresponse = $response->getTransactionResponse();

      if ( $tresponse != null && $tresponse->getMessages() != null ) {

         echo " Successfully created transaction with Transaction ID: " . $tresponse->getTransId() . "\n";
         echo " Transaction Response Code: " . $tresponse->getResponseCode() . "\n";

        $transCODE = $tresponse->getResponseCode();

         echo " Message Code: " . $tresponse->getMessages()[0]->getCode() . "\n";
         echo " Auth Code: " . $tresponse->getAuthCode() . "\n";
         echo " Description: " . $tresponse->getMessages()[0]->getDescription() . "\n";

        $transCODE = $tresponse->getResponseCode();
        $authCODE = $tresponse->getTransId();

      } else {
         echo "Transaction Failed \n";

        if ( $tresponse->getErrors() != null ) {
          echo " Error Code  : " . $tresponse->getErrors()[0]->getErrorCode() . "\n";
          echo " Error Message : " . $tresponse->getErrors()[0]->getErrorText() . "\n";
        }
      }

      // Or, print errors if the API request wasn't successful

    } else {
      echo "Transaction Failed \n";
      $tresponse = $response->getTransactionResponse();


      if ( $tresponse != null && $tresponse->getErrors() != null ) {
        echo " Error Code  : " . $tresponse->getErrors()[0]->getErrorCode() . "\n";
        echo " Error Message : " . $tresponse->getErrors()[0]->getErrorText() . "\n";
      } else {
         echo " Error Code  : " . $response->getMessages()->getMessage()[0]->getCode() . "\n";
         echo " Error Message : " . $response->getMessages()->getMessage()[0]->getText() . "\n";
      }
    }
  
// THIS EMAILS A BUNCH OF FOLKS, OR DISPLAYS AN ERROR PAGE. WORKS FINE IN THE SANDBOX. NOT FINAL VERSION OF THESE YET
     if ( $transCODE == 1 ) {
       include( 'qry/_inc_receipt_body.php' );
      } else {
       include( 'failed.php' );
      }
  } else {
     //echo  "No response returned \n";
  }
  return $response;

}

if ( !defined( 'DONT_RUN_SAMPLES' ) ) {
  createAnAcceptPaymentTransaction( "$pamount" );
}


When run - the nonce value is displayed for testing purposes - so I know it's there
$dataValue = eyJjb2RlIjoiNTBfMl8wNjAwMDUyQ0I0RjQ1QkVFNzhCN0I5NTM1OENCNkQ0RDJEQTVBMDRGNjM2RTEwNDNBNjQ2N0ZCQjNCNzZFRTkyNDIyNDZENDEwRTVGMzY2NEFFOEVDNTlBMEFCQzc1MTM2MzlDOUI2IiwidG9rZW4iOiI5NTYxNjA0NTcwMjMwODgxMTA0ODA1IiwidiI6IjEuMSJ9
$dataDescriptor = COMMON.ACCEPT.INAPP.PAYMENT

But, it fails when in productioin mode:
Transaction Failed Error Code : E00001 Error Message : An error occurred during processing. Please try again.

@LGMizzell

response = $controller->executeWithApiResponse( \net\ authorize\ api\ constants\ ANetEnvironment::SANDBOX

Needs to say

anetenvironment::PRODUCTION

My iPhones copy and paste function converted to lowercase. Fix that and change your environment and you should get somewhere.

Jezz, how did I miss that. Thanks ...

Now I'm getting: Transaction Failed Error Code : E00007 Error Message : User authentication failed due to invalid authentication values.

At least I've got something to work with now though. But, the keys DO work in the older version of the app. Go figure.

I think I'll give it a rest for the evening, create all new keys from scratch again in the morning, and pick back up from there.

I'll keep you posted. Thank you so much for your assistance.

Hello @LGMizzell 

 

If your successfully creating the nonce using the API Login and Client Key, but then getting an E00007 when submitting the transaction, it suggests the Transaction Key you're using in production are not correct.

 

Richard

The thing is - the SAME key numbers are working in an older version of the app that's still using the MD5 Hash ...

But, I'm going to generate all new keys in just a bit and see what happens from there.

Thanks

@LGMizzell

I sent you an IM. Iโ€™ll be on here on and off today. Just curious, have you discussed the PCI implications of this with your client? Are you using the SAQ A scope integration or the A-EP? The SAQ A version will keep you on the same level as your previous SIM integration.
Scratch that question. Your form is the SAQ A version.