cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to install the Python binding (https://pypi.org/project/authorizenet/) in Python 3.12

I am unable to install the Python binding authorizenet 1.1.4 (https://pypi.org/project/authorizenet/) in the latest version of Python (3.12).

Below is the error message.  Please advise.

>pip install authorizenet

Collecting authorizenet
Downloading authorizenet-1.1.4.tar.gz (148 kB)
---------------------------------------- 148.1/148.1 kB 679.1 kB/s eta 0:00:00
Installing build dependencies ... done
Getting requirements to build wheel ... done
Installing backend dependencies ... done
Preparing metadata (pyproject.toml) ... done
Collecting pyxb==1.2.5 (from authorizenet)
Downloading PyXB-1.2.5.tar.gz (8.8 MB)
---------------------------------------- 8.8/8.8 MB 12.0 MB/s eta 0:00:00
Installing build dependencies ... done
Getting requirements to build wheel ... error
error: subprocess-exited-with-error

× Getting requirements to build wheel did not run successfully.
│ exit code: 1
╰─> [33 lines of output]
<string>:81: SyntaxWarning: invalid escape sequence '\.'
<string>:180: SyntaxWarning: invalid escape sequence '\.'
<string>:181: SyntaxWarning: invalid escape sequence '\.'
xx\AppData\Local\Temp\pip-install-thykb4qv\pyxb_9c5f3cf8e6c2462a8a541b42a0c8ad6d\pyxb\utils\utility.py:972: SyntaxWarning: invalid escape sequence '\d'
__Lexical_re = re.compile('^([-+])(\d\d):(\d\d)$')
xx\AppData\Local\Temp\pip-install-thykb4qv\pyxb_9c5f3cf8e6c2462a8a541b42a0c8ad6d\pyxb\utils\utility.py:1145: SyntaxWarning: invalid escape sequence '\.'
"""Provide a list of absolute paths to files present in any of a
Traceback (most recent call last):
File "C:\Program Files\Python312\Lib\site-packages\pip\_vendor\pyproject_hooks\_in_process\_in_process.py", line 353, in <module>
main()
File "C:\Program Files\Python312\Lib\site-packages\pip\_vendor\pyproject_hooks\_in_process\_in_process.py", line 335, in main
json_out['return_val'] = hook(**hook_input['kwargs'])
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\Program Files\Python312\Lib\site-packages\pip\_vendor\pyproject_hooks\_in_process\_in_process.py", line 118, in get_requires_for_build_wheel
return hook(config_settings)
^^^^^^^^^^^^^^^^^^^^^
File "xx\AppData\Local\Temp\pip-build-env-_1k14pzl\overlay\Lib\site-packages\setuptools\build_meta.py", line 325, in get_requires_for_build_wheel
return self._get_build_requires(config_settings, requirements=['wheel'])
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "xx\AppData\Local\Temp\pip-build-env-_1k14pzl\overlay\Lib\site-packages\setuptools\build_meta.py", line 295, in _get_build_requires
self.run_setup()
File "xx\AppData\Local\Temp\pip-build-env-_1k14pzl\overlay\Lib\site-packages\setuptools\build_meta.py", line 487, in run_setup
super().run_setup(setup_script=setup_script)
File "xx\AppData\Local\Temp\pip-build-env-_1k14pzl\overlay\Lib\site-packages\setuptools\build_meta.py", line 311, in run_setup
exec(code, locals())
File "<string>", line 172, in <module>
File "xx\AppData\Local\Temp\pip-install-thykb4qv\pyxb_9c5f3cf8e6c2462a8a541b42a0c8ad6d\pyxb\__init__.py", line 76, in <module>
import pyxb.namespace
File "xx\AppData\Local\Temp\pip-install-thykb4qv\pyxb_9c5f3cf8e6c2462a8a541b42a0c8ad6d\pyxb\namespace\__init__.py", line 24, in <module>
import pyxb.utils.utility
File "xx\AppData\Local\Temp\pip-install-thykb4qv\pyxb_9c5f3cf8e6c2462a8a541b42a0c8ad6d\pyxb\utils\utility.py", line 22, in <module>
from pyxb.utils.six.moves.urllib import parse as urlparse
ModuleNotFoundError: No module named 'pyxb.utils.six.moves'
[end of output]

note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error

× Getting requirements to build wheel did not run successfully.
│ exit code: 1
╰─> See above for output.

note: This error originates from a subprocess, and is likely not a problem with pip.

Giri
Member
1 ACCEPTED SOLUTION

Accepted Solutions

If you're encountering issues installing the Python binding for Authorize.Net on Python 3.12, there are a few potential reasons and troubleshooting steps you can try:

1. **Compatibility**: Make sure that the Python binding you're trying to install is compatible with Python 3.12. Check the documentation or release notes for the binding to see if it explicitly supports Python 3.12.

2. **Dependency Installation**: Some Python packages have dependencies that need to be installed separately. Ensure that you have installed any required dependencies before attempting to install the Authorize.Net binding.

3. **Package Installation Method**: Try installing the Authorize.Net binding using a different installation method. You can use pip to install the package directly from the PyPI repository:
```
pip install authorizenet
```

4. **Virtual Environment**: If you're not already using a virtual environment, consider creating one to isolate your Python environment and avoid potential conflicts with system-wide packages:
```
python3.12 -m venv myenv
source myenv/bin/activate
pip install authorizenet
```

5. **Check Installation Logs**: If the installation fails, check the error messages and installation logs for more information about what went wrong. This can help diagnose the issue and determine any missing dependencies or compatibility issues.

6. **Update pip and setuptools**: Ensure that your pip and setuptools are up to date by running:
```
pip install --upgrade pip setuptools
```

7. **Compatibility with Python 3.12**: If the binding does not yet support Python 3.12, you may need to wait for an update from the package maintainers that includes compatibility with Python 3.12. In the meantime, you can consider using a lower version of Python that is supported by the binding.

If you continue to encounter issues, you may need to reach out to the maintainers of the Authorize.Net Python binding for further assistance or consider alternative solutions for integrating with Authorize.Net.

View solution in original post

JackAward
Member
5 REPLIES 5

If you're encountering issues installing the Python binding for Authorize.Net on Python 3.12, there are a few potential reasons and troubleshooting steps you can try:

1. **Compatibility**: Make sure that the Python binding you're trying to install is compatible with Python 3.12. Check the documentation or release notes for the binding to see if it explicitly supports Python 3.12.

2. **Dependency Installation**: Some Python packages have dependencies that need to be installed separately. Ensure that you have installed any required dependencies before attempting to install the Authorize.Net binding.

3. **Package Installation Method**: Try installing the Authorize.Net binding using a different installation method. You can use pip to install the package directly from the PyPI repository:
```
pip install authorizenet
```

4. **Virtual Environment**: If you're not already using a virtual environment, consider creating one to isolate your Python environment and avoid potential conflicts with system-wide packages:
```
python3.12 -m venv myenv
source myenv/bin/activate
pip install authorizenet
```

5. **Check Installation Logs**: If the installation fails, check the error messages and installation logs for more information about what went wrong. This can help diagnose the issue and determine any missing dependencies or compatibility issues.

6. **Update pip and setuptools**: Ensure that your pip and setuptools are up to date by running:
```
pip install --upgrade pip setuptools
```

7. **Compatibility with Python 3.12**: If the binding does not yet support Python 3.12, you may need to wait for an update from the package maintainers that includes compatibility with Python 3.12. In the meantime, you can consider using a lower version of Python that is supported by the binding.

If you continue to encounter issues, you may need to reach out to the maintainers of the Authorize.Net Python binding for further assistance or consider alternative solutions for integrating with Authorize.Net.

JackAward
Member

If you're having trouble installing the Python binding for Authorize.Net in Python 3.12, there are a few steps you can take to troubleshoot the issue:

1. **Ensure Python 3.12 Compatibility**: Check if the Python binding for Authorize.Net supports Python 3.12. Some packages may not be immediately compatible with the latest Python versions. You can check the package's documentation or GitHub repository for information on supported Python versions.

2. **Use a Virtual Environment**: Create a virtual environment specifically for your project to isolate package installations. This ensures that any conflicts with other packages or system configurations are minimized.

```bash
python3.12 -m venv myenv
source myenv/bin/activate # On Unix/Linux
myenv\Scripts\activate.bat # On Windows
```

3. **Upgrade pip and setuptools**: Ensure that you have the latest versions of pip and setuptools installed. Outdated versions of these tools may cause installation issues with certain packages.

```bash
python -m pip install --upgrade pip setuptools
```

4. **Install the Package**: Try installing the Authorize.Net Python binding again using pip:

```bash
python -m pip install authorizenet
```

5. **Check for Errors**: Pay attention to any error messages that occur during the installation process. These messages may provide clues about what's causing the installation to fail.

6. **Alternative Installation Methods**: If you're still unable to install the package using pip, consider alternative installation methods such as downloading the package source code from GitHub and installing it manually.

7. **Check for Package Updates**: Monitor the package's GitHub repository or PyPI page for any updates or patches that address compatibility issues with Python 3.12. The package maintainers may release updates to resolve installation issues or improve compatibility with newer Python versions.

8. **Seek Help**: If you're unable to resolve the issue on your own, consider reaching out to the package maintainers for assistance. They may be able to provide guidance or troubleshoot the problem with you.

By following these steps and troubleshooting methods, you should be able to install the Authorize.Net Python binding in Python 3.12 successfully.

JackAward
Member

<!DOCTYPE html>
<html lang="en">
<head>
<meta charset="UTF-8">
<meta name="viewport" content="width=device-width, initial-scale=1.0">
<title>Python Package Compatibility and Error Investigation</title>
</head>
<body>
<h1>Check if the pyxb package is compatible with Python 3.12.</h1>
<p>Investigate the error messages to understand what might be causing the problem.</p>
<p>Explore potential solutions to fix the issue.</p>
</body>
</html>

Thank you for the detailed response.  I reached out to Authorize.Net Support and they said that they would update the the Python binding to be compatible with Python 3.12. They did not provide a time frame for when I could expect it. The most recent version of Python that is compatible with the current binding is Python 3.9. However, this is set to reach end of life in October 2025.  So I decided to create a C# library for Authorize.Net transactions, and invoke it via PythonNet.

I am also facing the same problem please tell me the solution.